Flashing light
Flashing light
- Requires 12 - 24 V AC / DC (0.055 A)
- Colour: orange
- Integrated super-bright SMD LEDs
- Light intensity: 20 Cd(p)
- 360° all-round radiation
- Designed for continuous operation
- Continuous, single, double, triple flash
| Dimensions: | 75 (D) x 79 mm |
|---|---|
| Color: | Orange |
| Duty cycle: | Continuous operation (ED 100%) |
| Flash frequency: | Ca. 150 / min |
| Functions: | Warning light, single, double (xenon effect) or triple flash |
| Light intensity: | 20 CD(p) |
| Light source: | integrated super bright SMD LEDs |
| Operating temperature: | -30 °C bis 60 °C |
| Power supply: | 12 – 24 V AC / DC (0.055 A), 12/24V AC/DC |
| Protection class: | IP65 |
| Signal type: | 4 functions |
| Suitable for: | KSZ 8001 |
| Weight: | 0.1kg |
Our extremely reliable flashing light modules set new standards in terms of safety and warning effect. Equipped with an exceptionally high luminosity, they offer optimum visibility and attention. This is achieved through the use of super-bright LEDs that ensure a uniform 360-degree all-round beam. These modules offer various functions, including continuous light, single flashing mode, double flashing mode (xenon effect) and triple flashing mode. Even in the most demanding industrial environments, our flashing light modules maintain their maximum reliability.
The secret lies in their robust construction and the materials from which they are made. The lamp lenses and housings are made of impact-resistant polycarbonate, which is self-extinguishing and therefore offers additional safety. In addition, our flashing light modules offer complete contact protection, which ensures maximum safety.
Note:
Mandatory accessories required:
Adapter base (item no. 38002) and fastening element (item no. 38001, 38004, 38005)
Optional accessories:
Extension tube (item no. 38003)
Please order separately.
Attention: Please always order base element MSZ (item no. 38610) and fastening elements separately!
| CE-Declaration |
|---|
| CE_Konform_KWL-KBZ_2023-03-06 |
GTN 1975 Safety transformer Grothe bell and safety transformers are generally protected by a PTC, which switches off the transformer on the primary side in the event of a short circuit or overload. All transformers meet the highest environmental protection requirements, are tested in accordance with EN61558-2-6:2010 and are certified. The transformer is ideal for continuous operation and can be installed in either an electrical or flat distribution board and is labelled with an ENEC mark. The additionally available surface mounting set for the transformer includes two cover flaps as well as mounting rails and material to achieve protection class IP20. Note: A higher output voltage occurs at low load or idle! After a short circuit, recommission by briefly disconnecting the primary side from the mains (at least 1 minute). Accessories AP mounting set: Includes two cover caps to achieve protection class IP20 and mounting rails and material for surface mounting, art. No. 14936
The mounting base is used to mount small warning and flashing lights in a horizontal position. The product is made of sturdy PA66 plastic and is supplied with a sealing ring that gives the base an IP65 protection rating. Note: Mandatory accessories: Adapter base (item no. 38002) Optional accessories: Extension tube (item no. 38003) Please order separately in each case!
The adapter base is used to mount small warning and flashing lights in a horizontal position and is screwed directly onto the light, which is necessary to enable it to be combined with the other accessories. The product is made of sturdy PA66 plastic and is supplied with a sealing ring that gives the base an IP65 protection rating. Note: Mandatory accessories: Mounting base (item no. 38001 or item no. 38004 or item no. 38005) Optional accessories: Extension tube (order no. 38003) Please order separately !
The extension tube is used to attach small warning and flashing lights. The product is made of sturdy PA66 plastic and is supplied with a sealing ring that gives the extension IP65 protection.
The mounting bracket is used to mount small warning and flashing lights in a vertical position (wall mounting) and has a single connection. The product is made of sturdy PA66 plastic and is supplied with a sealing ring that gives the base an IP65 protection rating.
The mounting bracket is used to mount small warning and flashing lights in a vertical position (wall mounting) and has two connections. The product is made of sturdy PA66 plastic and is supplied with a sealing ring that gives the base an IP65 protection rating. Note: Mandatory accessories: Adapter base (item no. 38002) Optional accessories: Extension tube (item no. 38003) Please order separately !
Our extremely reliable flashing light modules set new standards in terms of safety and warning effect. Equipped with an exceptionally high luminosity, they offer optimum visibility and attention. This is achieved through the use of super-bright LEDs that ensure a uniform 360-degree all-round beam. These modules offer various functions, including continuous light, single flashing mode, double flashing mode (xenon effect) and triple flashing mode. Even in the most demanding industrial environments, our flashing light modules maintain their maximum reliability. The secret lies in their robust construction and the materials from which they are made. The lamp lenses and housings are made of impact-resistant polycarbonate, which is self-extinguishing and therefore offers additional safety. In addition, our flashing light modules offer complete contact protection, which ensures maximum safety. Note: Mandatory accessories required: Adapter base (item no. 38002) and fastening element (item no. 38001, 38004, 38005) Optional accessories: Extension tube (item no. 38003)Please order separately. Attention: Please always order base element MSZ (item no. 38610) and fastening elements separately!